In these environments, the POI (Point of Interface) combiner stands out as the core linchpin of the entire system architecture.
How should engineering teams effectively customize frequency bands for multi-operator POI combiners based on diverse regulatory environments, varying spectrum allocations, and multi-generation network demands?
Incorrect frequency band configuration does more than just degrade overall wireless throughput; it risks high insertion loss, elevates passive intermodulation (PIM) noise, and triggers destructive cross-operator interference. This article explores POI band customization from a practical engineering perspective, outlining core technical essentials and field deployment guidelines.
A Point of Interface (POI) platform bridges the physical gap between multiple operator base stations (BTS/gNB) and the downstream distributed antenna system. Its primary role is to aggregate multiple channels, distinct technologies (4G LTE, 5G NR), and mismatched power levels into a clean, low-loss RF path.
A typical high-performance POI architecture includes:
For massive infrastructure installations like regional transport hubs, a custom POI sub-rack must support traditional commercial legacy bands alongside critical public safety networks (e.g., TETRA, P25, FirstNet) simultaneously.
Spectrum allocations vary significantly depending on national regulators, geographical regions, and carrier assets. Standardization is rarely a viable option. For example:
| US Operator Allocations (Typical) | European Operator Allocations (Typical) |
|---|---|
|
|
Standardized off-the-shelf POIs often introduce unnecessary guard bands, excessive insertion loss, or altogether lack the precise filtering required to protect adjacent operator networks. Consequently, bespoke band customization is mandatory for mid-to-large-scale DAS deployments.
Before commencing the physical design and RF layout of a custom POI system, RF engineers must compile the following core data points:
Determines the absolute number of input sectors, cross-coupling configurations, and layout complexity within the master POI chassis.
Requires exact guard bands, uplink/downlink split frequencies, and sub-carrier allocations (e.g., Operator A deploying LTE 1800MHz with 20MHz bandwidth vs Operator B deploying 5G NR on 3.5GHz with 100MHz bandwidth).
Defines whether paths will operate as SISO, 2x2 MIMO, or 4x4 MIMO. Multi-MIMO configurations require duplicate, isolated tracking paths within the POI to preserve phase and spatial multiplexing performance.
To avoid cross-operator desensitization and active component overload, high-tier POIs enforce a baseline port isolation metric of ≥ 80 dB between independent sub-bands.
Cascading multiple filter blocks natively introduces attenuation. Elite cavity designs aim to keep link-budget insertion loss bounded strictly between 3.0 dB to 5.0 dB across high-power combined paths.
Multi-carrier systems generate severe harmonic mixing products. Industry-standard customized POIs maintain strict compliance ratings of PIM3 ≤ -150 dBc to -153 dBc (tested under 2 × 43 dBm tones), which is crucial for maximizing 5G data rates.
Environment Scope: Multi-terminal transport hub requiring simultaneous commercial and municipal coverage.
Environment Scope: Underground parking, shopping retail malls, and twin-tower corporate offices.
Beyond raw frequency specifications, engineering directors must screen manufacturers using specific structural benchmarks:
A: Modern high-density architectures can support anywhere from 6 up to 20+ independent bands. Advanced customized designs partition these across cross-connected modular chassis blocks.
A: Yes. By specifying pre-configured upgrade paths during design, vendors include wideband hybrid matrices or dedicated expansion ports, allowing on-site engineers to connect new sub-6GHz radios without replacing the core chassis.
A: Absolutely. Custom POIs utilize premium sharp-skirt cavity filters to ensure that different air-interface technologies operate flawlessly without overlapping or inducing receiver blocking.
A: You need to submit: Operator count, exact operational frequency bands (Tx/Rx), maximum input RF power per port, target PIM limits, mechanical footprint constraints, and MIMO matrix path configurations.
Conclusion
Customizing frequency bands for multi-operator POI combiners directly impacts immediate cellular performance and dictates long-term infrastructure scalability. By capturing precise operator spectrum profiles and outlining future expansion roadmaps early on, infrastructure teams guarantee high-efficiency, ultra-stable, and future-proof distributed antenna system networks.
Теги :
У вас есть какие-либо вопросы ?
Позвоните Нам : +86 551 65329702
